is there any way to continuously auto-redial a busy number until connected using obi? *66 doesn't work.
I found this:
Copyright 2010 Obihai Technology, Inc.
OBi Star Code FeaturesOBi Star Code Enabled Features Apply to All Voice Services
*05 Redial Last Called Number Until Ring or Answer (Periodically)
*06 Cancel the Last Repeat Dial Request*07 Redial
*69 Call Return
*81 Block Caller ID (Persistent Mode)
*82 Unblock Caller ID (Persistent Mode)
*67 Block Caller ID (One Time)
*68 Unblock Caller ID (One Time)
*72 Call Forward All (Enter Number + #)
*73 Disable Call Forward All
*60 Call Forward on Busy (Enter Number + #)
*61 Disable Call Forward in Busy
*62 Call Forward on No Answer (Enter Number + #)
*63 Disable Call Forward No Answer
*77 Block Anonymous Calls
*87 Unblock Anonymous Calls
*56 Enable Call Waiting
*57 Disable Call Waiting
*78 Do Not Disturb - Turn On
*79 Do Not Disturb – Disable
*74 Speed Dial Set-Up (Enter SD No. [1-99] then Tel No. + #) ∞
*75 Speed Dial Read-Back (Enter SD No.)
*03 Called OBi Will Loopback Media
*04 Called OBi Will Loopback RTP Packets
*4711 Use G711 Only on the Next Outbound Call
*4729 Use G729 Only on the Next Outbound Call
∞ Be careful with the Speed Dial Set-Up as this will conflict with the Speed Dials
set-up on the OBiTALK portal. The Speed Dials that are set-up on the OBiTALK
portal will always overwrite anything set-up via the phone connected to the OBi.