Any handyman out there that can help with a DIY question?

[Sam 77]

Liquid nails (a name brand of construction adhesive which comes in a caulk gun tube) would be my choice
Double check whatever glue you choose as some can dissolve foam
You will probably need to brace / put a couple of tapcon screws/nails to hold the board until the bond sets

From your location I thought you would say "super sheva" 

[SHL]

From your location I thought you would say "super sheva" 

Was thinking that but he said he has a garage so assumed he wasn't in my country anymore
Do keep in mind yo7 would want the super7 Hi-Tech
The classic is more of a sealant then a glue

[etech0]

Any recommendations for easy-to-install LED under cabinet lighting that doesn't need a smartphone to turn it on and off?

[yossisch1]

Does anyone have an idea what I can do to a room that is colder than other rooms (Besides buying a heater)

[RLevy]

Does anyone have an idea what I can do to a room that is colder than other rooms (Besides buying a heater)

Balance hvac?
Close unnecessary vents

[yossisch1]

Balance hvac?

Is that a DIY?

[RLevy]

Balancing no
But before you do that try closing all vents that aren’t needed throughout that floor, this way the heat will be pushed to the room that’s not getting as hot.

[notyettaken]

Does anyone have an idea what I can do to a room that is colder than other rooms (Besides buying a heater)

Switch the HVAC fan (on your thermostat) from auto to on. (assuming a forced air system)

[AYHG]

Recently came across this product https://www.amazon.com/Pomeney-Register-Adjustable-10-Speed-Thermostat/dp/B0D2N7VDM2/?th=1, a vent register fan meant to increase airflow to a specific vent.

There are oodles of sellers on amazon selling these things in different sizes and specs, and some reviewers say they work.

[Essen est zich]

What sink drain strainer can fit? The diameter of  outer part is 4 and 1/2 in and inner is 2 inches.

[Definitions2]

What sink drain strainer can fit? The diameter of  outer part is 4 and 1/2 in and inner is 2 inches.

Did you try any yet?
We have the kosher cook strainer. It's 4.5 outer diameter but 2.5 inner and around 1.5 deep. But the mesh is somewhat malleable so you might be able to get it to squeeze in.

[Essen est zich]

Did you try any yet?
We have the kosher cook strainer. It's 4.5 outer diameter but 2.5 inner and around 1.5 deep. But the mesh is somewhat malleable so you might be able to get it to squeeze in.

I tried that before and it didn't work.

I bought this but it does not fit.
https://www.amazon.com/gp/aw/d/B07LHKFZTR?psc=1&ref=ppx_pop_mob_b_asin_title

[SSLPhD]

What sink drain strainer can fit? The diameter of  outer part is 4 and 1/2 in and inner is 2 inches.

Perhaps a "hair catcher for bathroom sink" is what you need.  Or, if you go into a housewares store, they may have a multi-pack of various sizes.

[Essen est zich]

Perhaps a "hair catcher for bathroom sink" is what you need.  Or, if you go into a housewares store, they may have a multi-pack of various sizes.

I ordered this, hopefully should work.
https://www.amazon.com/gp/aw/d/B000DZF4US?ref=ppx_pt2_mob_b_prod_image

[CountValentine]

Anyone every use these drywall anchors?
https://www.amazon.com/gp/product/B07CVT1N4M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1

[~King Lake~]

Anyone every use these drywall anchors?
https://www.amazon.com/gp/product/B07CVT1N4M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1

Used the same thing in plastic

[Jojo202]

My driveway has cement walls on each side which my car door slams into if I'm not careful. Thinking of putting some sort of pad on the cement wall, any ideas?

Cheapest option: Dollar tree or other discount store, A pool noodle cut in half (like a cross section). Glue the flat side against the wall (it works). Cheap and effective.

Random online image:

[Essen est zich]

I ordered this, hopefully should work.
https://www.amazon.com/gp/aw/d/B000DZF4US?ref=ppx_pt2_mob_b_prod_image

Just a update, it worked.

[nafnaf12]

Cheapest option: Dollar tree or other discount store, A pool noodle cut in half (like a cross section). Glue the flat side against the wall (it works). Cheap and effective.

Random online image:

even cheaper option took this from a package I had delivered lol



The main issue was that corner, but I should add along the driveway